Enviro Tek’s Asbestos Testing Drop Off Location – Minneapolis MN

A Nationwide Leader Of Environmental Services

Enviro Tek’s Asbestos Testing Drop Off Location – Minneapolis MN

Just Say

“Hi, this package is for Enviro Tek.”

Drop off your Asbestos Samples in person, the same day at our office Reception Desk (Pictured Below):

121 Washington Avenue North

Minneapolis MN 55401

Drop off times are Monday thru Friday from 8:30am to 5:00pm

Your samples must be dropped off to us sealed in a Zip Lock type of bag and include the filled out form below.

Main Level Reception Desk (Pictured Above)

Also known as the Spaces Building in the NORTH LOOP – Minneapolis


Fill out the form below and include it with your samples.

Need Instructions or Help?

Live Chat with us! Look towards the bottom right of your screen.

How To Collect An Asbestos Sample

  1. Use a small “zip-lock” bag to contain the sample. The bag should be clean and dry.
  2. Before taking the sample, wet the material to be sampled with a fine mist of water containing a few drops of detergent (this will minimize the release of asbestos fibres).
  3. Using a clean knife, cut out a small piece of material about 2 square inches or approximately 2 tablespoons worth and put in it the zip-lock bag. Be sure to penetrate  any paint or protective coating and make sure you sample all layers of the material.
  4. Tightly close the sample bag and wipe the exterior with a damp paper towel to remove any material which may have adhered to the bag during sampling.
  5. For pipe/boiler/duct insulation, patch the location from which the sample was taken by carefully applying a generous amount of adhesive aluminum foil tape.
  6. Mist with water and carefully fold up the plastic sheet. Clean the work area using a damp paper towel or disposable cloth, not a vacuum cleaner, and seal the asbestos waste, gloves, mask and cloth in a  plastic bag. Check with your local municipality on how to dispose of asbestos-containing  waste. Wash clothing separately and shower after completing the work.
  7. Label the sample bags identifying the specific location of the sample in the room or structure, and who took the sample.
  9. Enclose all samples in a large zip-lock bag and mail it into Enviro Tek (ADDRESS BELOW) or drop it off in person at or Office:

Drop Off / Office Address:

121 Washington Avenue North


Mail All Samples to:


PO BOX 581315